6
G.
Plug the power adapter into a
110/120V electrical outlet.
H.
I.
Plug one end of the Ethernet
cable into the front of the PoE
injector.
Plug the other end of the
Ethernet cable into the back
of the network router.
J.
K.
Power on device.
Connect to the device through
an Internet browser.
THE THERMAL IMAGER NEEDS SUFFICIENT WARM-UP TIME
FOR THE MOST ACCURATE TEMPERATURE MEASUREMENTS
AND BEST IMAGE QUALITY. THIS TIME CAN OFTEN VARY BY
ENVIRONMENTAL CONDITIONS. IT IS BEST TO WAIT A MINIMUM
OF 10 MINUTES FOR THE DEVICE TO COMPLETELY WARM-UP.
