5
EN
G
IMPORTANT
PRECAUTIONS
WARNING!
To reduce the risk of serious injury due to improper use of the
training equipment, carefully read and adhere to the following
important precautions and information before operating the bike.
1.
It is the responsibility of the owner to ensure that all users
are informed of all warnings and precautions for proper use
of the training equipment and it is only authorized for use in
a supervised environment with qualified instructors.
2.
Do not operate the training equipment until it has been properly
assembled and inspected as described in this manual.
3.
Keep the training equipment away from moisture and dust. Do not place
the training equipment in a garage, covered patio, near water or pools.
Operating temperature of the training equipment has to be between
15°C~ 40°C Celsius (59°~104°F) at max. humidity of 65%.
4.
Always place the training equipment on a stable, level surface.
If the training equipment is to be placed on a hardwood floor
or carpet, it is recommended to place a floor mat beneath
the bike, to protect the floor from becoming damaged.
5.
The level of safety of the training equipment can only be guaranteed if it
is regularly checked for possible damage as well as wear and tear (e.g. fixing
points, pedals, toe straps, etc.). Consult an authorized service provider or the
manufacturer to ensure the regular inspections are properly carried out.
6.
Carry out all maintenance, care and service procedures as described
in this manual on a regular basis. Defective parts must be replaced
immediately, and the device must not be used until the repairs have been
carried out. Only use original parts from the manufacturer. Repairs must
only be carried out by from manufacturer authorized service technicians.
7.
Unsupervised children should be kept away
from the training device at all times.
