icetro SSI-141TG, User Manual

Page: 9 / 32

9
YOGURT & SOFT ICE CREAM FREEZER
STANDBY
Power switch
SALE SIGNAL
LEVER
HIGH REFRIGERATION
STANDARD
REFRIGERTION
YOGURT ICE CREAM
(LAMP FLASH)
SOFT ICE CREAM
(LAMP ON)
STANDARD
SOFT REFRIGERATION
FREEZING
CONTROL LEVEL REFRIGERATION
CONTROL LEVEL
MODE BUTTON
Press button while
3 seconds.
When it will be highly
refrigertion, it is one
of the causes of solution
supplying problem.
FREEZING LEVEL
5
4
3
2
1
WASH AUTO
Chapter 3. Functional Description
· When this switch is turned on, you can start manipulating the control panel on the front.
Power switch
Standby
It is possible to store the mix in the mix container at a cold temperature to suppress
propagation of bacteria at or below 4.4.
When it is necessary to store the mix for extended period of time without selling the
ice cream, the machine keeps the mix at a constant temperature between 1.7 and 4.4,
thereby preventing overcooling. When you push the button, the lamp will be turned on and
the mode starts. In the standby mode, the wash and the auto function are turned off. To
restore normal operation, push the “AUTO” button. When the machine stops rotating, the
ice cream in the freezer cylinder will become very sticky.
Mix level indicator lamp -“MIX LOW”
· “The mix level indicator lamp is located above the button. If the lamp blinks, it
means that the level of mix is low and that the mix should be replenished as soon as
possible. The level of the mix container should always be maintained at a position where
the mix can sufficiently touch the level sensing rod. If the mix is not replenished in timely
manner. It may freeze up.
· A frozen mix Container may cause damage to the dasher, the blade, the driver shaft and
the discharge outlet.
Caution
Each indicating lamp or push button makes a sound. Whenever it is
pushed down. To cancel a function push the function button once again.
The lamp will turned off and the function canceled.