icetro SSI-141TG, User Manual

Page: 13 / 32

13
$BSCVSFUPS
⑤
Insert the supply pipe into the
mix container with the hole facing
downward.
⑥
Push in the dasher blade on the shaft
inside the cylinder. Join it accurately so
that the dasher will not protrude outside.
Attempt to rotate the dasher blade with
a hand. You can confirm that it is
properly fitted into the groove if the
dasher blade does not rotate.
⑦
Apply edible grease to the
packing that goes inside the shaft.
If the packing is damaged or worn out,
replace it with a new one.
⑧
Apply edible grease into the hole
of the dasher cover, and insert
the shaft from an upside down
position.
⑨
Insert the handle into the shaft
and join it by pushing the
sideways
⑩
Insert the gasket and the
white-colored bearing into the dasher
cover with the wider side of the
bearing facing the dasher cover as
shown in the picture. Do not apply
edible grease.