18
Cleaning Method
【Cleaning the ice box and water tank】
1. Set the position of the power switch (ICE/OFF/WASH) to OFF.
2. Remove the power cord from the outlet.
3. Block the water supply.
4. Open the door of the ice maker.
7. Dilute 10g (0.35oz) of neutral detergent(baking soda, neutral
detergent for dishwasing or as equals to) in 3 liters (0.79gal) of
warm water (35 to 45
℃
(95~113
℉
)), soak the clean cloth with
the cleaning liquid, and wipe the ice tank and water tank.
8. After cleaning, connect the drain plug and drain hose again and
tighten three bolts.
The surface temperature of the pump motor is very hot. So when any partof your
body contacts with it, it may cause a burn. When the machine is cooled down
enough after turning off the power, start cleaning
6. Rotate three bolts on the bottom counter clockwise
clockwise to release them, pull out the drain hose
from the drain hole, and remove
the water tank.
- Remove the ice sensor from the
distributor.
- Remove scale from the nozzle hole of the distributor.
- Connect the ice sensor again.
- Remove two screws on the left and
the right of the distributor.
※
Clean them one or more times every month.
Caution
Caution
Drain hose
packing down
distributor.
ice sensor
drain plug
Door
Water tank
Be careful not to bump your head into the edge of
the door while it is open.
5. Remove the drain plug down from the water tank.
