icetro ISI-300TW, User Manual, Page: 21 / 56

21
Functional description of the buttons
11
Functional description of the buttons
For your
information
If 2-3 is too high, an error may occur.
This error is caused by poor environmental conditions (clearance, cleaning, ventilation, etc.).
You should install the machine according to the manufacturer's recommendation.
Check the temperature and the record
Press the "Select" button to check the different temperature
settings mentioned below. The item number and the temperature
will be displayed in turns.
2-1: Temperature of the mixing tank
2-2: Temperature of the mixing tank sensor
2-3: Condenser suction temperature (neighboring temperature)
2-1: Temperature of the mixing tank
The sensor located at the bottom of the mixing tank to measure
the temperature of ingredients may display temperatures
different from the actual ones if there is no
ingredient in the mixing tank or mixer.
2-2: Temperature of the cylinder
The sensor located at the bottom front of the cylinder may
display temperatures different from those of the ingredients
or the ice cream.
2-3: Ambient temperature of the condenser
The sensor located in front of the condenser can measure the
temperature of the ambient air entering the condenser and the
recommended installation conditions as well.