icetro ISI-271SHSN, User Manual

Page: 58 / 88

58
How to use USB downloader
1. How to write programs on main PCB, vent PCB, control PCB .
1-1. Follow the steps as described below with USB downloader connected to main PCB, vent
PCB, control PCB:
1-2. Turn power off to the self machine off.
1-3-1). Copy the main PCB program on the USB memory root folder in name of “ISIV273_Main. hex.”
3-2). Copy the vend PCB program on the USB memory root folder in name of “ISIV273_Vend.hex.”
3-3). Copy the control PCB program on the USB memory root folder in name of “ISIV273_Control.hex.”
F:
W
USB STORAGE Address
USB STORAGE(F)
Go
File Edit View Tool Help
Name Type Date
ISIV273_Control.hex hex 2012-12-18...
ISIV273_Main.hex hex 2012-12-18...
ISIV273_Vend.hex hex 2012-12-18...
×
▼
1-4. Insert the USB memory stick in the USB downloader.
1-5. Turn power to the self machine on.
1-6. The red, the green and the yellow LED’s lights on the USB downloader.
1-7. The red LED is extinguished, the green LED extinguished, and the yellow LED lights on
the USB downloader.
1-8. The red LED blinks, the green LED extinguished, and the yellow LED is extinguished on
the USB downloader.
1-9. The red LED is extinguished, the green LED blinks, and the yellow LED is extinguished
on the USB downloader.
1-10. The red LED is extinguished, the green LED extinguished, and the yellow LED blinks on
the USB downloader.
1-11. The red LED is extinguished, the green LED blinks, and the yellow LED blinks on
the USB downloader.
1-12. The red LED is extinguished, the green LED lights, and the yellow LED is extinguished
on the USB downloader.
●
The red LED lights, the green LED is extinguished, and the yellow LED is
extinguished if error takes place during writing the programs.
For your
information