icetro ISI-163TT, User Manual

Page: 18 / 40

18
Cleaning method
【 Washing of each parts 】
【 Condenser and filter cleaning method 】
【 Drain slug cleaning method 】
13. Disassemble the mixing shaft and wipe it off with a brush.
1. Pull out the condenser filter located on the right side
of the machine.
※ One time a week
14. Take out the piston of the dasher cover and clean
the edge of the piston with a soft towel.
2. Remove dust from the filter element or use a vacuum
cleaner, and wash it clean with water.
●
Clean and dry the filter and insert in into the machine.
15. After cleaning off all parts, dry them and reassemble them
in the reverse order.
3. The condenser surface has lots of dust. Remove it by using
a household vacuum cleaner or hand held cleaner.
Clean and dry the filter and insert it into the machine.
Mixing shaft
Drain slug