8
W
e T
hink of Cus
tomer S
at
is
fac
tion
2.Introduction of Product
3. Specifications and Limitations
ID-H250-30 / ID-H150-22 is a hotel ice dispenser. This dispenser is designed for use
with the ICETRO ice maker IM SERIES on top.
REGULAR , DICE , HALF shaped ice cubes are used as the ice source. It is not
recommended to use thin ice or nugget ice.
Ice from the ice maker falls into a bin, where it is stored until needed. When the user
presses the button, the shutter opens and turns the wheel inside the storage bin to
pump ice up to the outlet at the top of the front of the storage bin.
This device is designed to be installed and operated indoors in the specified
environment.
The operating temperature is the same as the operating temperature of the ice
maker. (Operating temperature 50 ~ 100F / Operating voltage 115)
Check the nameplate on the side of the cabinet for specific information.
Specifications and designs are subject to change without notice by ICETRO.
If the product is modified by using parts not specified by ICETRO, we cannot take
any responsibility for the product.
The basic configuration is configured so that ice comes out when the button is
pressed, and ice continues to be sold while the button is pressed.
Ice maker model used
Appropriate model
IM-0350/0460/0550
ID-H150-22
IM-0350/0460/0550/0750
ID-H250-30
Summary of Contents for ID-H250-30
Page 9: ...9 4 Product Size and Description POWER SUPPLY...
Page 21: ...21 MEMO...
Page 22: ...22 We Think of Customer Satisfaction MEMO...
Page 23: ...23 MEMO...
