background image

ICE TECH PS                                                                                                                  

 

                                                                                                                             

 

1.  INTRODUCTION 

 

Thank you for choosing ICE TECH’s ICE TECH PS

You  have  purchased  one  of  the  most  reliable  ice

read the instructions contained in this manual since they provide important information relative 

to safety during installation, use and maintenance.

1.1.  Warnings 

 

This appliance should be installed by approved Technical Service Personnel.

This plug should be accessible at all times.

To reduce the risk of electrical shock, ALWAYS disconnect the machine BEFORE cleaning or 

maintaining the equipment. Do not attempt to install, service, or modify this machine. Improper 

use by other than specially trained technicians is extremely dangerous and may result in a fire 

or electric shock.  

This machine should not be placed outdoors or exposed t

Connect to drinking water mains.

This appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

  

 

IMPORTANT! 

•  DO  NOT  ATTEMPT  TO  SERVICE  THIS  MACHINE  AS  IT  IS  DANGEROUS  AND  COULD 

CAUSE SEVERE DAMAGE TO THE UNIT. 

•SERVICE SHOULD ONLY BE CARRIED OUT BY TRAINED, QUALIFIED PERSONNEL. 

•WE  STRONGLY  RECOMMEND  USING  ONLY  ORIGINAL  REPLACEMENT  PARTS 

AVAILABLE FROM AN AUTHORIZED  DISTRIBUTOR.

•WASTE  AND  OTHER  MATERIAL  SHOULD  BE  DISPOSED  OF  ACCORDING  TO  LOCAL 

REGULATIONS AND PROCEDURES FOR WASTE DISPOSAL.

•CLEANING AND MAINTENANCE ARE NOT COVERED BY THE WARRANTY. 

 

 

 

ICE TECH PS                                                                                                                                  Technical Service Manual

                                                                                                                                                                                                             

ICE TECH’s ICE TECH PS-C ice cube makers. 

You  have  purchased  one  of  the  most  reliable  ice-making  machines  on  the  market.  Carefully 

read the instructions contained in this manual since they provide important information relative 

on, use and maintenance. 

This appliance should be installed by approved Technical Service Personnel.

This plug should be accessible at all times. 

To reduce the risk of electrical shock, ALWAYS disconnect the machine BEFORE cleaning or 

the equipment. Do not attempt to install, service, or modify this machine. Improper 

use by other than specially trained technicians is extremely dangerous and may result in a fire 

This machine should not be placed outdoors or exposed to rain. 

Connect to drinking water mains. 

This appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

•  DO  NOT  ATTEMPT  TO  SERVICE  THIS  MACHINE  AS  IT  IS  DANGEROUS  AND  COULD 

CAUSE SEVERE DAMAGE TO THE UNIT.  

•SERVICE SHOULD ONLY BE CARRIED OUT BY TRAINED, QUALIFIED PERSONNEL. 

•WE  STRONGLY  RECOMMEND  USING  ONLY  ORIGINAL  REPLACEMENT  PARTS 

HORIZED  DISTRIBUTOR. 

•WASTE  AND  OTHER  MATERIAL  SHOULD  BE  DISPOSED  OF  ACCORDING  TO  LOCAL 

REGULATIONS AND PROCEDURES FOR WASTE DISPOSAL. 

•CLEANING AND MAINTENANCE ARE NOT COVERED BY THE WARRANTY. 

Technical Service Manual

 

 

                                                                                 

 

making  machines  on  the  market.  Carefully 

read the instructions contained in this manual since they provide important information relative 

This appliance should be installed by approved Technical Service Personnel. 

To reduce the risk of electrical shock, ALWAYS disconnect the machine BEFORE cleaning or 

the equipment. Do not attempt to install, service, or modify this machine. Improper 

use by other than specially trained technicians is extremely dangerous and may result in a fire 

This appliance is not intended for use by young children or infirm persons without supervision. 

Young children should be supervised to ensure that they do not play with the appliance. 

•  DO  NOT  ATTEMPT  TO  SERVICE  THIS  MACHINE  AS  IT  IS  DANGEROUS  AND  COULD 

•SERVICE SHOULD ONLY BE CARRIED OUT BY TRAINED, QUALIFIED PERSONNEL.  

•WE  STRONGLY  RECOMMEND  USING  ONLY  ORIGINAL  REPLACEMENT  PARTS 

•WASTE  AND  OTHER  MATERIAL  SHOULD  BE  DISPOSED  OF  ACCORDING  TO  LOCAL 

•CLEANING AND MAINTENANCE ARE NOT COVERED BY THE WARRANTY.  

Summary of Contents for PS 122

























Reviews: