iCES IMP-100, User Manual, Page: 6 / 46

6
2.2 If you’re using a Mac OS PC, you can also disconnect player by dragging
the player icon on the desktop to the Trash.
2.3 Once it is safe to disconnect the player with your computer, unplug the
USB connector from player and then your computer.
2.4 If you accidentally disconnect the player without disconnecting correctly,
reconnect it to your computer.
E. Getting Started
1. Power On/Off
1.1
Plug-in the earphone set into the player’s earphone output jack;
1.2 Press and hold the button, until the Status LED lights up in blue, to
power On the player.
1.3 The blue light will switch to blinking and then the music will play
automatically.
1.4 To turn Off the Player; press and hold the button until the status LED
light blinks fast and then the Player will switch Off a few seconds later.
Note: If any unsupported music files are added to the player’s memory; the status
indicator light will flash fast and then will go Off, and the player will turn Off
automatically a few seconds after.
2.
Play/Pause Music
2.1
Press button to pause the playing music.
2.2 Press it again to resume playback.
2.3 If player is in a pause state for 3 minutes, it will turn to standby Off mode
automatically.
3. Adjusting the Volume
3.1
Pressing / button will increase or decrease the volume level one
step at a time.
3.2 Press and hold / button to increase or decrease volume level
continuously.
NOTE: For hearing protection; a beep warning will be heard from the
earphones every time you increase the volume level and reach the default
setting level which may exceed 85dB. Press
button to accept the warning
and the user can continue to increase the volume level until the maximum level
is reached.
4. Play Next/Previous Music
From the playing mode;
4.1
Press button to play next track.
4.2 Press button to play previous track.
5. Play Fast-Forward/Fast-Backward
5.1
Press and hold button to enter fast-forward mode.
5.2 Press and hold button to enter fast-backward mode.