=13=
➢
After setting all the items, press the soft key
to start the sweep function and press the key
to stop.
4. System settings and interface parameter settings
Press the key
to enter the system setting interface. Press the soft key
to select the
parameters for the in/out position, sound setting, brightness adjustment, language setting,
synchronization function setting, and arbitrary wave display quantity setting.
➢
Call Out & Save: Save/recall the current waveform parameters to the specified position, rotate the
knob to adjust to the specified position. Press the corresponding soft key when you want to recall,
save, or clear.
➢
Sound settings: Sounds can be turned on and off with keys
、
.
➢
Brightness adjustment: Brightness adjustable from 0 to 12 levels can be quickly adjusted by
rotating encoder.
➢
Language setting: Available by pressing
、
to select English and Chinese
display.
➢
Synchronization: The CH1 channel is used as the operation target during synchronization. The
parameters of the CH2 channel change following the CH1 channel parameters. When the
synchronization item is highlighted, press the key
or rotate knob to select the item
to be synchronized (frequency, waveform, amplitude, duty cycle, offset), press the soft key
to select it, and press the soft key
to cancel.
➢
Arbitrary waveform number setting: The number of arbitrary waveforms of the main
interface waveform can be quickly adjusted by rotating the encoder (1-60).
➢
starting point frequency, end point frequency, sweep time, sweep direction and sweep mode.
After the item is highlighted, use the arrow keys (or press the soft
－
key
) and the knob to
edit the item's parameters.
After setting all the items, press the soft key
to start the sweep function and press the key
to
stop.