4.5. Reversing the Door
The door opening can be reversed from “right hand hinged” to “left hand hinged” if
required. If your appliance is supplied “left hand hinged” simply reverse the
following procedure.
Warning!
When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
•
Remove the screws from the top cover and lift the cover away from the
appliance
•
Lean the appliance back and prop it up securely at the front
•
Remove the bottom door hinge screws and remove the bracket
•
Remove the door from the upper hinge
•
Swap the upper door pin to the opposite side of the appliance
•
Now insert the door onto the upper door pin
•
Secure the lower door hinge into place
•
Do not fully tighten the screws until you have tested that the door closes
correctly and that the door seal is tight
•
Now secure all the screws
•
Refit the top cover.
N.B. Service calls relating to door problems and/or cooling issues will be
chargeable if the fault is found to be due to an incorrect door
reversal procedure carried out by the consumer!
14
Summary of Contents for RHL550SE
Page 20: ...CKICK U01 M...
