Iceking IK20569SE, Installation And Operating Manual

Page: 11 / 28


Remove the retaining screws and lift off the appliance top cover.

Remove the screws and upper-hinge assembly then lift and remove
the upper door away from the middle hinge assembly. Now remove
the hinge pin from the upper hinge, turn the hinge over and refit the
pin into the same hole.

Remove the screws and middle hinge assembly then lift the lower
door away from the lower hinge assembly.

Remove the screws, lower hinge and foot assembly. Now remove the
hinge pin from the lower hinge, turn the hinge over and refit the pin
into the same hole.

Remove the left foot and refit on the right-hand side.

Now fit the lower hinge and foot assembly to the left-hand side.
Tighten the screws.

Place the lower door onto the lower hinge and then refit the middle
hinge into the pre-drilled holes on the left-hand side of the cabinet.
Tighten the screws.

Now place the upper door onto the middle hinge and then refit the
upper hinge into the pre-drilled holes on the left-hand side of the
cabinet. Tighten the screws.

Ensure that both doors are correctly aligned and that they seal
correctly. If the doors require further alignment, slacken off the
screws, re-align the doors then tighten the screws.

Re-fit the appliance top cover.
10