4
SET-UP / TESTING / MAINTENANCE
SAFETY PRECAUTIONS
IMPORTANT: FAILURE TO FOLLOW THESE DI-
RECTIONS CLOSELY COULD CAUSE SERIOUS
DAMAGE TO YOUR GAME.
WARNING: WHEN INSTALLING THIS GAME, A 3
PRONG GROUNDED RECEPTACLE MUST BE
USED. FAILURE TO DO SO COULD RESULT IN
SERIOUS INJURY TO YOURSELF OR OTHERS.
FAILURE TO USE A GROUNDED RECEPTACLE
COULD ALSO CAUSE IMPROPER GAME OPERA-
TION, OR DAMAGE TO THE ELECTRONICS.
DO NOT DEFEAT OR REMOVE THE GROUNDING
PRONG ON THE POWER CORD FOR THE SAME
REASONS AS GIVEN ABOVE. USING AN IM-
PROPERLY GROUNDED GAME COULD VOID
YOUR WARRANTY.
GAME SET-UP
BEFORE PLUGGING THE GAME IN, OR TURNING
IT ON, BE SURE THE GAME HAS BEEN SET TO
THE PROPER VOLTAGE. YOUR GAME SHOULD
COME PRE-SET FROM THE FACTORY CORRECT
VOLTAGE, HOWEVER IT IS A GOOD IDEA TO
CHECK THE A.C. WALL RECEPTACLE VOLTAGE
BEFORE PLUGGING THE GAME IN.
ASSEMBLY INSTRUCTIONS
1. Carefully unbox the game from its packaging.
2. Using the supplied keys, unlock the front
door of the cabinet.
3. Cut all tie wraps holding the wagon assembly
and crane in place.
4. Plug the game into a three prong grounded
receptacle. NOTE: The appliance must be
positioned such that the plug is accessible
during use.
5. The game is now ready for start up.
TESTING
After the initial setup, it is time to test your game for
proper operation.
1. Locate the game in its permanent location.
2. Be sure the game has been properly plugged
into a 3 prong grounded outlet, and that the
receptacle is in good working order.
3. If using an extension cord, be sure it is a 3
prong grounded type of at least 16Ga.
4. Verify that the game is set up for the proper
voltage, and turn the power to the game on.
5. The game will run through a test mode at
every startup. See test mode explanation in
the programming section for details.
6. Insert coins/bills into the machine at least ten
times into the coin mech/bill acceptor to as-
sure proper operation
7. Check the credit and prize counters for
proper operation.
8. Check game volume during busy time at lo-
cation to set it at the proper level.
CLEANING
Regular cleaning of this game will keep it looking
new, and greatly enhance its appeal.
Clean the windows of your ROUND CRANE with a
standard window cleaner such as Windex®
Clean the cabinet sides with a good cleaner such as
“Fantastic” or “409” and a soft rag. A mild soapy so-
lution can be used. You may use a furniture polish
when finished to protect the game and make it look
more attractive,
NOTE: DO NOT USE ALCOHOL, THINNERS OF
ANY KIND, OR PINBALL PLAY FIELD CLEANERS
ON ANY OF THE CABINET SURFACES ESPE-
CIALLY THE DECALS.
IF YOU HAVE ANY QUESTIONS OR COMMENTS
REGARDING INSTALLATION OR PROPER FUNC-
TION OF YOUR GAME, PLEASE CALL OUR SER-
VICE DEPARTMENT AT
1-716-759-0360
