background image

41

 

 

WARRANTY POLICY

 

I.C.E. Inc warrants all components in new machines to be free of defects in materials and workmanship for 
the period listed below:

 

 

 

 

■ 180 

days on Main PCB

s, Computers & Motors

 

 

■ 1 

year on all LCD monitor panels

 

 

■ 90 

days on all other electronic and mechanical components

 

■ 30 

days on all I.C.E. repairs and parts purchases

 

 

I.C.E. Inc shall not be obligated to furnish a warranty request under the following conditions:

 

  

■ 

Equipment or parts have failed through normal wear and tear

 

 

■ 

Equipment has been subjected to unwarranted stress, abuse or neglect

 

 

■ 

Equipment has been damaged as a result of arbitrary repair/modification 

 

 

Products will only be covered under warranty by obtaining an I.C.E. authorized RMA #.  To obtain an RMA # 
please provide I.C.E. tech support with the game serial # or original I.C.E. invoice # and a detailed description 
of the failure or fault symptoms. 

 

 

I.C.E. Inc will assume no liability whatsoever for costs associated with labor or travel time to replace defective 
parts.  All defective warranty covered components will be replaced with new or factory refurbished compo-
nents equal to OEM specifications.

 

 

 

 

I.C.E. Inc will cover domestic UPS ground, or comparable shipping costs during the warranty period.

 

 Interna-

tional or expedited shipments are available for an additional charge.  To obtain credit defective parts must be 
returned to I.C.E. Inc, at the customer

s expense, within 30 days.  After 30 days a 15% re

-

stocking fee will 

apply to all returns.

 

 

ICE distributors are independent, privately owned and operated.

 

 In their judgment, they may sell parts and/or 

accessories other than those manufactured by I.C.E. Inc.

 

 We cannot be responsible for the quality, suitability 

or safety of any non

-

I.C.E. part or modification (including labor) that is performed by such a distributor.

 

 

Innovative Concepts in Entertainment

 

10123 Main St.

 

Clarence, NY 14031

 

Phone #: (716) 

-

 759 –

 0360

 

Fax #: (716) –

 759 

 0884

 

www.icegame.com

 

Summary of Contents for Bean Bag Toss










































Reviews: