11
Programming:
To access configuration menu the machine should have no credits and be at attract mode.
To enter the Program Menu press and hold <ENTER> for a few seconds. The display will show
“
P1
”.
This informs you that you are in program mode.
To navigate the menu:
Momentarily pressing the <ENTER> key will advance to the next parameter.
Momentarily pressing <ESC> key will go back a parameter.
Momentarily pressing <UP> key will INCREASE the value for that parameter.
Momentarily pressing <DOWN> key will DECREASE the value for that parameter.
Holding <ESC> will exit out of the configuration menu and SAVE CHANGES.
