Ice TAITO PANIC MUSEUM DELUXE, Assembly Manual

Page: 3 / 18

Step 14: Locate the front panels 14 and 15. 14 attaches to the left side and 15 attaches to the right.
The podium has studs already mounted that the panel slides into. The side that connects to the
wall slides into the wall itself. Use self tappers to attach to the walls and nuts to attach to the po-
dium. See figure K.
Step 15: Now tighten the two mounting bots used to attach the podium to floor supports in step 14.
See Figure J.
Step 16: At this time you will need to run the sensor wiring, speakers and upper AC through the
center wiring channel and up the center of the back wall. The AC wiring and speaker wires should
be routed through the top of the back wall behind the screen. The harness can be discounted at the
podium. Plug the two fans located at the back of the ceiling support. Plug in the two speakers lo-
cated also at the back of the ceiling supports.
Step 17: Attach the marquee onto the front support bar. Use 1” bolts for the top holes and 2” shoul-
der bolts for the bottom two. The ac harness routes out the top of the marquee. See Figure L.
Step 18: Locate the three ceiling panels labeled 19,20,and 21. 19 is the back most panel, 20 is the
center and 21 is the front. The mounting holes only correct aligns when the proper panel is at-
tached. Make sure the marquee AC power is routed on top of the ceiling. See figure M.
Your game is now assembled.