26
ICE RS26L+ / RS32L+
OPERATOR MANUAL
TANK DRAINING
Draining The Recovery Tank
Draining The Solution Tank
While holding the Recovery tank drain
hose (Machine components, #41)
upward, remove the cap and lower
hose to drain.
Open the Recovery tank cover
(Machine components, #22) and rinse
out the tank. Use a rag to remove any
excess dirt.
While holding the Solution tank drain
hose (Machine components, #43)
upward, remove the cap and lower
hose to drain.
Remove and clean the vacuum fan
inlet filter located in the recovery tank.
Clean the filter with a damp cloth or
low pressure water hose if dirty.
Allow the vacuum fan filter to dry
completely before reinstalling it in the
machine.
Rinse the solution tank with clean
water after every use. This will help
prevent chemical buildup and clogging
of the solution lines.
(See Fig. 18)
1.
2.
1.
3.
2.
Any time scrubbing is completed, or when refilling solution tank, the recovery tank should be drained
and cleaned.
Any time scrubbing operation is completed, the solution tank should be drained and cleaned.
WARNING:
If the recovery tank is not drained when the solution tank has been refilled,
foam or water may enter the float shutoff screen and cause damage to the
vacuum motor.
Figure 18
Summary of Contents for RS26L+
