Ice MTECH 70 D Use And Maintenance Manual Download | Manualshive

Page: 37 / 56

background image

37

AT THE END OF WORK

11.Attach the squeegee body to the squeegee connector.

12.Insert the vacuum hose (07) into the sleeve (08) on the squeegee body.

13.If necessary to empty the solution tank, unscrew the tap-filter (10) on the left-hand side of the machine,

and when finished, re tighten.

14.Connect the electrical system connector (04) to the battery connector.

15.Take the machine to the designated machine storage place.

16.Disconnect the electrical connector (04) from the battery connector.

17.Put the machine in rest mode. Using the control handlebar (11) (pushing downwards), lift the rear part

of the machine so that the rear wheel (12) rests on the floor.

WARNING

: Park the machine in an enclosed place, on a flat and level surface; near

the machine there must be no objects that could either damage it, or be damaged

through contact with it.

«
...
35
36
37
38
39
...
»

Summary of Contents for MTECH 70 D

























































Reviews:

No comments

Related manuals for MTECH 70 D

Brand: Stratasys Pages: 16

Brand: BZB Gear Pages: 12

Powr-Flite BLACK MAX PFX1350 Series

Brand: Tacony Pages: 11

Brand: Kärcher Pages: 324

Brand: HAKO Pages: 60

Brand: Factory Cat Pages: 50

Brand: Factory Cat Pages: 54

Brand: Tornado Pages: 25

Brand: Nilfisk-Advance Pages: 2

Brand: Nilfisk-Advance Pages: 2

Brand: Nilfisk-Advance Pages: 28

Brand: Nilfisk-Advance Pages: 52

Brand: Nilfisk-Advance Pages: 10

Brand: Nilfisk-Advance Pages: 13

SelectScrub KA-27

Brand: Nilfisk-Advance Pages: 16

Brand: Nilfisk-Advance Pages: 32

Brand: Nilfisk-Advance Pages: 43

Brand: Nilfisk-Advance Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands