Ice EXTREME AIR FX Service Manual Download | Manualshive

Page: 9 / 16

background image

9

Locating the Score Head and sides:

The score head assembly is bolted to the bottom of the cabinet. The side rails and divider are
attached with straps stapled to the bottom of the cabinet.

Installing Score Head:

The score head is mounted on the opposite side of the coin door.  Insert the wire harness from
the score header marquee into the cabinet.  Then attach the Score Header Marquee using
four AA6584 1/4 20 black bolts and washers.  Open the playfield back up and connect the
harness.

«
...
7
8
9
10
11
...
»

Summary of Contents for EXTREME AIR FX

















Reviews:

No comments

Related manuals for EXTREME AIR FX

Brand: NAMCO Pages: 44

WaterFuls WR1000EX

Brand: Innovative Concepts in Entertainment Pages: 17

ArcadePro Jupiter 5794

Brand: Home Leisure Direct Pages: 4

Brand: JVL Pages: 37

Brand: Atronic Pages: 59

Brand: IDEAL Pages: 18

Brand: Bandai Namco Pages: 16

Brand: IGS Pages: 60

Saturn 1000F2 Portable

Brand: Worldline Pages: 4

Brand: CIMLINE Pages: 40

Brand: CIMLINE Pages: 48

Brand: MyBinding Pages: 8

Brand: MyBinding Pages: 65

Brand: MyBinding Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands