background image

IOD16022

Introduction                                                                                         IOD22030

Page 1

To the owner or user: This product manual is a source of information about the installation, start up,
cleaning, maintenance and repair of the product.  

The IOD16022 and IOD22030 are ice only counter top dispensers designed to use 22 inch wide and
30 inch wide respectfully Ice-O-Matic cubed ice machines as the source of ice.

Ice from the cuber falls into the insulated bin where it is stored until needed.  When a user pushes the
dispense button, a rotating wheel scoops the ice up to the top front of the bin where there is an outlet
to the ice chute.  Ice will dispense continually for as long as the push button or lever is depressed or
until the bin is empty.

Table of Contents

Specification/Limitations

Page 2-3

Installation

Page 4-7

Cleaning

Page 8-9

Service Diagnosis

Page 10

Parts List

Page 11-19

Wiring Diagram

Page 20-21

Warranty Information

Page 3

Note the warning symbol where it appears in this manual.
It is an alert for important safety information on a hazard 
that might cause serious injury.

Keep this manual for future reference.

Summary of Contents for Counter Top Dispenser IOD22030























Reviews: