Ice Bear PST50-19N, Manual

Page: 36 / 40

CLEANING:
To protect the surface of painting, you should
clean your motorcycle periodically. Check for the
wear parts and the lacking of engine oil.
NOTE:
High pressure current may damage the parts of
your motorcycle.
To avoid spraying the follows parts with high
pressure current.
Ignition switch instrument carburetor drive
chain entrance of silencer bottom of fuel tank
switch of steering bar seat bottom
1) Spraying your motorcycle with clean water after
finishing cleaning. Some remains of detergent may
eroded the alloy parts.
NOTE:
Clean the plastics with soft cloth clean the dirty
place several with clean water.
2) Start the engine and make it run for several
minutes after drying the motorcycle.
3) Before start the engine again, try the brakes
several times until the normal function can be
shown.
WARNING:
You’d better consider the distance for braking to
avoid danger after cleaning.
4) Add the lubricating oil to the drive chain after
cleaning and drying.
ALUMINUM TIRE MAINTENANCE:
The corrosion is caused when the aluminum tire
gets to rocky and mud road. You‘d better clean and
dry it with soft cloth.
NOTE:
To avoid the unnecessary scar, never use the
abrasive detergent and polishing clean your tire.
34