background image

operating & maintenance manual

 – 

console water source heat pump (wshp)

6

operation

Normal Mode

1.  Press [ON/OFF] to turn on thermostat.

2.  Press [Mode] to change the system mode.

3.  There are three operation modes (Cool Mode,  

 

 

Heat Mode, Auto Mode). 

Cool Mode

• 

To activate cooling mode, press the mode  

 

 

 

button until COOL displays.

• 

Press up/down arrow keys to your desired  

 

temperature.

• 

Compressor will cycle when temperature  

 

reaches the set-point. After compressor  

 

 

 

stops, allow at least 3 minutes before  

 

restarting (this applies only if you have  

 

manually turned the unit off or reset the  

 

 

 

thermostat – during normal running  

 

conditions, the unit will automatically  

 

allow for the required restart delay). 

 

The temperature reading that is on constant  

display is the ambient room temperature. 

 

Heat Mode

• 

To activate heating mode, press the  

 

Mode button until HEAT displays.

• 

Press up/down arrow keys to your  

 

desired temperature.

• 

The unit will cycle until the set  

 

temperature is achieved and then will  

 

continuously cycle to maintain the set  

 

temperature. 

 

The temperature reading that is on constant display  

is the ambient room temperature. 

eVent tIme

heat

cool

mon-

FrI

waKe
leaVe
return
sleep

6:00 am
8:00 am 
6:00 pm 
10:00 pm

70º F (21º c) 
62º F (17º c) 
70º F (21º c) 
62º F (17º c)

78º F (26º c)
85º F (29.5º c) 
78º F (26º c) 
82º F (28º c)  

sat-

sun

waKe
leaVe
return
sleep

6:00 am
10:00 am 
6:00 pm 
11:00 pm

70º F (21º c) 
62º F (17º c) 
70º F (21º c) 
62º F (17º c)

78º F (28º c)
85º F (29.5º c) 
78º F (26º c) 
82º F (28º c)  

6:08

am

mON

WaKE

Auto Mode

• 

To activate auto mode, press the mode  

 

button until AUTO displays. 

• 

Press up/down arrow keys to set  

 

desired heat temperature.

• 

Wait 5 seconds for cool to appear.

• 

Press up/down arrow keys to set  

 

desired cool temperature.

• 

The unit will automatically cycle between  

 

heat and cool modes if unit exceeds desired  

 

set points. The temperature reading that is  

 

on constant display is the ambient room  

 

temperature. 

internal Setting

Enter internal setting mode by pressing and holding 

[Mode] key for 5 seconds

Summary of Contents for Console Water Source Heat Pump













Reviews: