operating & maintenance manual
–
console water source heat pump (wshp)
8
operating Specifications
•
Temperature measurement
°C ~ 40°C / 32°F ~ 99°F
•
Accuracy: ±0.5°C/ 1°F
•
Voltage: 18-30VAC
•
Temperature Controllable range:
5°C~35°C / 55°F ~ 95°F
•
Resolution: 0.5°C /1°F
•
Operating temperature:
0 – 50°C / 32 – 122°F
•
Storage temperature:
5 – 50°C/ 23 – 122°F
maintenance & SerVice
caution:
to prevent injury or death due to electrical
shock or contact with moving part, turn off the discon-
nect switch before servicing this unit.
IMPORTANT NOTE: It is not the intent of this mainte-
nance manual to correct any installation deficiencies. If
you have any doubt about the proper initial installation
(or reinstallation after servicing) of your WSHP unit(s)-
noisy or inefficient unit operation, frayed or damaged
electrical connections, improper unit appearance, etc.
– please contact a trained servicer or building mainte-
nance staff immediately.
Do not operate any eQuIpment that Does not
appear to Be FunctIonInG properly!
maintenance oVerView
Your
ICE AIR WSHP
unit is designed to provide you
with many years of efficient, trouble-free comfort
conditioning service. To ensure equipment longevity
and efficiency, please make sure that the following
simple maintenance procedures are followed.
This manual assumes that your WSHP unit has been
installed by a qualified installation professional, and
is operating properly prior to maintenance service.
Have your unit periodically inspected by a
properly trained service professional or
building maintenance staff person. The unit
should be checked for the safe and proper
functioning of all of its systems at least once a
year. The following recommended maintenance
procedures should be carried out only by trained
personnel with strict adherence to the safety
guidelines outlined at the beginning of this
manual. These procedures MUST be followed to
ensure your safety and the safety of the person
maintaining the equipment.
FILTER
ICE AIR WSHPs
are equipped with a washable/
reusable Aluminum Filter. It is recommended
that you clean the indoor air filter after every 350
to 400 hours of unit operation – more frequently
if the unit is running in an environment of high
dust, pet dander or other pollutants in the indoor
atmosphere.
•
Filter inspection: The filter is located at
the bottom of your unit. To remove filter,
slide it out towards you.
•
To reinstall, place filter under the unit
and slide back into the filter rack.
Filter cleaning:
To clean your filter, use lukewarm water with a
biodegradable cleaner. Rinse and allow to dry
completely before reinstalling in unit.
(As an alternate cleaning method, the filter may
be cleaned on both sides using a vacuum cleaner
with a soft brush type attachment).