Page 29 of 36
Now, pull the slider all the way up to the canopy, placing it symmetrically against all four slider
stops. Flake the slider to each side between the line groups and neatly organize the fabric.
The following section gives general guidelines for folding the canopy to fit into a freebag.
Because of the variation in size and shape of container systems, freebags from different
container manufacturers will, of necessity, vary in shape and size. The exact amount of material
in each fold of the canopy will then have to vary so that the material is distributed to fit in the
freebag and container being used.
First, reduce the width of the reserve pack job to approximately the width of the freebag. Fold
under all the fabric above the A lines to achieve the desired width. Take care to not disturb the
neat distribution of the lines up the middle of the pack job. Repeat the folds symmetrically on
the other side. If the slider is disturbed during this process, ensure that it is again pushed up
against the slider stops and distributed symmetrically.
I
CARUS_NANO_01.01.18 V01 Owners Manual Letter
ICARUS Canopies, S.L. / ICARUS Canopies, Inc. - Copyright 2018 © - www.icarusworld.net
This document has no contractual value and in some cases the descriptive content may contain inaccuracies.
OWNERS MANUAL
01
.
01
.
18
V
01
Summary of Contents for NANO 106
Page 1: ...Owners Manual 01 01 18 V01 www icarusworld net...
Page 2: ......
