Icare AP-1801, User Manual

Page: 3 / 6

HOW TO USE
1.Connect the purifier with the household power
cord with following the illustration guidance.
2.Plug in the wall power socket.
3.Switch to the required mode to start the purifying.
1.Connect the car charger cord with air purifier.
2.Plug into the 12V power socket setup on car.
3.Switch to the required mode to start the purifying.
4.Please always keep air conditioner of car itself in
the low air speed mode status.
NOTICE:
(In door)
⚫
Assuring the device can work normally, to install the purifier at well-ventilated position.
(In Car)
⚫
Switch the air purifier on before you start to drive the car.
⚫
Please always unplug the car charger when you stop the car operation, for the safety of car battery.
⚫
Remember to switch the machine off to the mode (O) after using the air purifier. If not, the fan will be
delayed a few seconds to get powered when you turn on the air purifier next time. This is regular
condition.
O: Turn-off the power.
A: Automatic mode. The device will run and detect the surrounding air quality automatically at low speed for 3
minutes as the default setting, and it will adjust itself to suggested speed.
I: Purifying at low speed
II: Purifying at high speed
LED indicator:
It will reflect indoor air quality by 3 light signals,
Green light: Power on
Red light flashing slowly: Filter replacement reminder
Red light flashing quickly: Filter cartridge is not placed in the
correct position
Be sure the plastic packing is removed before installing the filter.
Attention ！
(Indoor) (In Car)
Benefit the front passenger seat
Central armrest in the rear seat
Platform behind the rear seat