iCandy apple
5. Warning
Check that the car
seat is correctly engaged before use.
18. Attaching the adaptors (sold
separately)
Locate and fit the car seat adaptors as
shown, ensuring the grey buttons latch
flush. The adaptors should lean rearwards
for correct orientation.
19. Installing the Maxi-Cosi Infant
Carrier
Place the car seat onto the adaptors with
the head end at the front until you hear a
“click”. Check to make sure that everything
is attached securely.
20. Removing the Maxi-Cosi Infant
Carrier
Press the control buttons on both sides
while at the same time lifting the car seat
from the adaptors.
21. Removing the Car Seat
Adaptors (sold separately)
Depress the grey buttons and withdraw.
22. Securing your child using the
5-point safety harness
Feed the buckle tongues 1 & 2 into the
buckle housing 3 and click together.
Adjust your five-point harness at the points
indicated in the direction of the double
arrows as required.
To unfasten the harness squeeze in the
buckle tongues 1 & 2 and pull out of the
buckle housing 3.
D-Rings are provided for attaching an extra
harness complying to BS 6684.
6. Warning
To avoid serious
injury, always use the 5-point safety
harness.
23, 24 & 25. Fitting the PVC
Raincover
Fit raincover as shown ensuring velcro tabs
are secure where necessary.
7. Warning
never leave
raincovers, hoods and aprons on or
over the pushchair indoors, in a hot
atmosphere or near a heat source,
your child may overheat.
7. Bumper bar
Attach the bumper bar onto the brackets, it
will click into place. Press in grey buttons
simultaneously and pull up bumper bar to
release.
8. Bumper bar blanks
Bumper bar/carry handle blanks can be
fitted if preferred.
9. Attaching the seat unit to the
chassis
Insert the seat adaptor assembly into the
main connector on the frame. You can
position the seat unit to have your child
facing you or facing forward.
2. Warning
This seat is not
suitable for children under 6 months.
3. Warning
Check that the pram
body (carrycot) or seat unit
attachment devices are correctly
engaged before use.
10. Reclining the seat unit
To recline the seat unit press the grey
buttons on both sides and move into
required reclined or upright position.
Release buttons when in desired position.
11. Adjusting the footrest
Press both buttons on the sides of the leg
rest, adjust to desired position and release
to lock.
12 & 13. Front wheel
The front wheels can be selected either in a
fixed position or in a swivel position.
14. Handle height adjustment
There are seven handle height positions. To
adjust, press the grey centre button and
pull up simultaneously to desired level.
Release button and engage at the desired
height.
15. Using the brakes
To apply brake, press down gently on the
middle of the brake bar. Rocking the
pushchair assists engagement. To release
brake, place foot under brake bar and pull
upwards.
4. Warning
always apply the
brakes when the pushchair is
stationary.
16 & 17. Folding the chassis
Remove the seat unit before folding. Press
the grey handle height adjuster button 1
whilst depressing the secondary lock
button 2. When the handle is at its lowest
point, push downwards to disengage and
fold the stroller 3. Apply the hold together
latch as per picture 1.
Using with a Maxi-Cosi Infant
Carrier Car Seat
Maxi-Cosi Infant Carriers are suitable for
children from birth to 15 months and
weighing up to 13kgs. (As indicated on the
Maxi-Cosi Infant Carrier).