
iCandy apple
iCandy apple instructions
Correct use and maintenance of your
pushchair is essential. Please take the time
to fully and carefully read this instruction
manual. If you require any further advice or
assistance when using your pushchair,
please contact the place of purchase.
1. Warning
With the exception of
the outer packaging carton, to
prevent injury from choking, remove
and immediately discard all other
protective packaging on this product.
Follow these simple instructions to
assemble your iCandy apple.
a
canopy (hood)
b
bumper bar
c
seat unit
d
chassis
e
rear wheels
f
car seat adaptors (sold separately)
g
raincover
The iCandy apple is tested to comply with
BSEN 1888:2003 and is tested to ensure
compliance with the Furniture and
Furnishings (Fire) (Safety) Regulations.
Useful tip
New products are sometimes stiff to
engage and operate. We recommend ALL
adaptors (sold separately) and connector
parts be lightly lubricated with a silicone
based furniture polish. This is best
achieved by spraying polish onto a soft
cloth and applying to relevant parts.
1. Folded/hold together latch
To release the folding strap depress both
indicated clips simultaneously.
This latch
must be engaged before storage.
2. To open
To open the iCandy apple stand behind the
pushchair and, with both hands on the
pushbar, pull-up until the iCandy Apple
clicks into place.
3. Fitting the brake bar/rear axle
assembly
Turn the iCandy apple upside down.
Position the brake bar / rear axle assembly
with the brake levers uppermost. Once the
rear axle assembly is secure to the main
chassis pull firmly on each side of the
combined brake bar / rear axle assembly to
check that the assembly on both sides is
securely locked into place.
4. To fit the rear wheels
Lift locking locating catch. Place the wheel
into the axle. Release locking locating
catch and wheel should lock into position.
Pull on wheel to ensure that it is securely
fitted. This process is repeated for the other
side.
5. Attaching the canopy (hood)
Fit the canopy by locating onto the seat
frame ensuring it latches into the bracket
securely.
6. Removing the canopy (hood)
Remove canopy by depressing both side
clips as shown and pull to remove.
13
14
15
16
17
18
19
22
23
20
21
24 & 25
1
2
3
2
1
3