10
USING THE HAIRDRYER
STEP 2
Divide your hair into different sections and layers. Start to straighten the lower layers. Use a flat or
round brush to comb your hair downwards, while directing hot air at your hair from the air
connector nozzle. Slowly straighten each section of the hair from the roots to the tips. When you
have straightened the lower layer, move on to the middle layer and then finally the top layer.
Make your hair wavy
Set the temperature (4) to the lowest setting (position ) and switch the speed switch (5) to the low
airflow setting. Press sections of your hair firmly between your fingers, turn them in the direction
that they naturally wave in and then dry them by blowing air between your fingers. When you have
achieved the right effect, press the button for cold air (3) and fix each section.
Style
STEP 1
Set the temperature and air flow (4 and 5) to a low temperature and a low airflow. Attach the air
concentrator nozzle (1) to direct the flow of air.
STEP 2
Divide your hair into sections and style using a round styling brush. While you are doing this, direct
the flow of air towards your hair in the direction you want.
STEP 3
If necessary, direct the flow of air towards each lock for between 2 and 5 seconds to fix your hair.
TIPS AND ADVICE
1. In general use a higher temperature and higher airflow when you start drying if you want to dry
your hair until it is damp or if you have thick hair. Use the lower settings when you use your fingers
in your hair, to style your hair and to make fine adjustments.
2. Use the air concentrator nozzle to direct the flow of air.
3. This model has a function for cold air that fixes your hairstyle. Keep the cold air button (3) pressed
down, as this will help you fix your style.
4. The appliance has inbuilt protection to prevent overheating, which switches the appliance off
automatically if it becomes too hot. If the appliance switches off while you are using it, you should
turn the power switch (4) off into the "0" position and take the plug out of the socket. Make sure that
the air openings are not clogged, let the appliance cool for 5-10 minutes and then switch it back on
again. Do not block the air openings when you are using the appliance. Make sure that your hair is
not sucked into the air inlet grille.
SPECIFICATIONS:
Product code: JZ-38I. Voltage: 220-240 V ~50-60 Hz. Power: 2000-2200 W
Important safety instructions. Read them carefully and keep them for future reference.
