11
Manufactured in China for ICA AB, SE-171 93 Solna, Sweden.
Customer contact: + 46 (0) 20-83 33 33 or www.ICA.se
CLEANING AND MAINTENANCE
STORAGE
• Check that the straightener is completely cool and dry.
• Do not wind the mains cord around the straightener.
• Always let the straightener cool before putting it away.
As we are constantly developing the function and design of our products, we reserve the righ
to make changes to the product without prior warning.
In accordance with the WEEE directive, every member state must ensure that electrical and
electronic waste is collected, recovered, handled and recycled correctly. Private households
in the EU can take this kind of waste to special recycling stations free of charge.
1. Unplug the straightener and let it cool before you try to clean it. The straightener becomes very
hot when it is switched on and it can take some time for it to cool down. Always let the straightener
cool on a heat-resistant surface out of the reach of children� Never cover the straightener�
2. When the straightener has cooled down, you can clean the handle with a soft, dampened cloth
(only use water). Then dry carefully using a soft cloth before using it again or putting it away.
3� Do not use abrasive or polishing detergents�
4. Do not immerse the power cord, the plug or the straightener in water or any other liquid.
SPECIFICATIONS:
Product code: JDL-153. Voltage: 100–240 V ~ 50-60 Hz. Power: 55 W.
Important safety instructions. Read them carefully and keep them for future reference.
