– 5 –
Cleaning the Filters
When flip up “Smiley Face” stays down, on Duster 600
When gauge is reading 1500 or less on high position Duster 2000
HP-36 Filter
Procedure:
1. Turn off machine.
2. Vacuum the pads first.
3. Remove pads and
vacuum pleated filter
behind the pads.
4. Reinstall the pad.
5. Reinstall filters.
Note:
Occasionally, remove
the filter and high-pressure
wash (10" away) only the
pleated filters to remove
trapped particulate. Wash
both sides of the filter for
1/2 minute each side at least.
Carbon Filters:
(not
cleanable) Check filter
seals that the carbon
filters are kept clean.