
BEFORE YOU START
Power Supply
Installing and Replacing the Batteries
1. Open the battery door.
2. Insert the batteries according to the polarity
indications.
3. Close the battery door.
Replace the batteries under following circumstances:
displays on the LCD.
The LCD display dims.
When powering on the monitor, the LCD doesn’t light up.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
CAUTION
BEFORE YOU START
Download and install My BP Coach
from iTunes App store or Goo
g
le play
Apply the Cuff
2
.As pictured on the right, position
the cuff on your upper arm.
1.Insert the plug of cuff’s air pipe into
the interface located on the right side
of the monitor.
3
.Tighten the cuff. Make sure the cuff
is fixed 2 to 3 centimeters (about an
inch) above your elbow.
You should be able to insert one
finger when the cuff is tightened
around your upper arm.
4
.Correct Posture:
It is best to position the cuff on your bare
arm.
Sit comfortably and relaxed in a chair.
The center of the cuff should be about
even with your heart.
S
it
with legs relaxed with your feet falling
outwards. Rest your arm on a table with
your palm facing up.
6
AC adaptor
(Included)
1
.Battery powered mode:
6VDC 4×AAA batteries
2
.AC adaptor powered mode:
6V 1A
(Can be supplied by AC adaptor model
UE08WCP-060100SPA) (Included)
Please unplug the adaptor to use battery
power.
7
CAUTION
In order to get the best effect and protect your monitor, please use the
battery and power adaptor, which complies with U.S. safety standard.
Do not dispose of batteries in fire. Batteries may explode or leak.