I C R E A L T I M E S E C U R I T Y S O L U T I O N S
10
Web GUI Operation
This section outlines how to assign an IP address to the camera,
and how to access and control the IPC via it’s built in Web
Interface.
3.a Network Connection
•
Step 1: Ensure the Camera is physically connected to your Network, and Powered
ON.
Patch the IP Camera into your network with a standard Ethernet cable. Provide the camera
with power either via PoE or with the separate 12VDC power input jack.
•
Step 2: Assign an IP address to the IP Camera.
The ICIP D720-IRT12 Series camera (and all ICR IP Cameras) have a factory default static
IP address of 192.168.1.108. If this matches the same subnet as your LAN, you will be able
to login to the camera by typing this address into your browser (assuming that the IP
address does not conflict with another device on your network).
Alternatively, you can use our IP Auto Search utility to rapidly find and change IP addresses
for IC Realtime series IP Cameras. The utility is available on our support page at :
http://www.icrealtime.com/docs/IPAutoSearch.zip
3.b Logging In, and Main Interface
•
Step 1: Open up your Web Browser (Safari, Chrome, Firefox, or IE) and input the
IP address of your IP camera.
In Example, open Safari and browse to
•
Step 2: Follow the on screen prompts to install the plugin
When you first access the IP Camera over your web browser, you will be prompted to install
the plugin. See below:
