I C R E A L T I M E S E C U R I T Y S O L U T I O N S
9
SD cards shall not be installed or removed while the camera is powered and operational.
Doing so can potentially result in damage to the camera, and any data stored on the SD card.
•
Step 2: Remove the cameras dome cover
Using the included hex wrench from the accessories kit, unfasten the 3 hex screws on the
dome camera enclosure and then remove it..
•
Step 3: Insert SD card
Look on the base plate of the camera to see the section labeled “SD Card”. Insert your
micro SD card (Pin side down) until it clicks securely into place. At this point you can restore
power to the camera, and attach the dome cover again.
Chapter
3
