IC Realtime EL-3000N, Instruction Manual

Page: 10 / 11

18 19
8. Functions and operation 9. Troubleshooting
(1) DISP SEL : Select display item.
- ID : OFF/ ON
- TITLE : OFF/ ON
- ZOOM RATIO : OFF/ON
(2) INIT SEL : Select items to display on the screen on initializing time after power-on.
- ID : OFF/ ON
- BAUD RATE : OFF/ ON
- PROTOCOL : OFF/ ON
- VERSION : OFF/ ON
(3) SET TITLE : Select camera title menu (Text edit).
(4) SET INIT MSG : Select camera initial message menu (Text edit).
(5) LANGUAGE : Select language.
-ENGLISH/ KOREAN
(6) SETUP STATUS : Show the setup status of CURRENT OSD menu and compare
the each value with the one of the FACTORY default.
[MENU]
[EXIT] [SAVE] [DFLT]
FOCUS
EXPOSURE
WHITE BALANCE
IMAGE
INTELLI GENCE
SPECIAL FUNC
DISPLAY
[
DISPLAY
]
[EXIT] [SAVE] [DFLT]
DISP SEL
INIT SEL
SET TITLE
SET INIT MSG
LANGUAGE
ENGLISH
SETUP STATUS
8-9. DISPLAY
Problems Troubleshooting
Nothing appears on the screen. · Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen is dim. · Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen is
dark. · Adjust the contrast feature of the monitor.
· If you have an intermediate device,
GGšŒ›G›ŒG^\ȳGVGoTG—™–—Œ™“
(Please check the impedance)
The camera is not working
properly, and the surface of the
camera is hot. · Please check that you have properly connected the
camera to an appropriate power source.
The DAY/NIGHT menu does
not work. · Please check if DAY NIGHT menu is set to ‘AUTO’.
The DSS function does
not work. · Please check that the mode of EXPOSURE SETUP menu
is set to ‘SHUT.P’ or ‘MANUAL’.
The MOTION DETECTION
function is not working. · Please check if MOTION DETECTION function is
turned on.
· Please check if MD sensitivity is too low.
· Please check the setting of the MD area.
Color is not correct. · Please check the setting of WHITE BALANCE SETUP
menu .
The screen flickers continually. · Please check that direction of camera turns toward
the Sun.
If there are problems in operating, please refer to the checklist below. If the problem
persists, please contact the agent where this product is purchased.