4
3
Installation
Important
Before the installation, please make sure the installation surface can sustain at least 3X weight
of the bracket and the camera.
The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the wall. Please
refer to Figure 3-1 for installation hole site.
For side exit cable installation, please make sure the side exit cable direction is the same as shown in
the installation position map.
Before you secure the screws on the pedestal, please put the cable through the cable exit of the
pedestal.
Before you complete the installation and debug, do not remove the electrostatic film. After you remove
the film, do not touch the enclosure in case there is any scratch.
Figure 3-1
