5
Do not remove the screw. Loosen a little bit will be OK. Please secure after you completed the
setup.
Figure 3-2
Step 4
Line up the bulge of the decoration ring to the nick of the camera body and install along the tilt
installation. Push and then turn decoration ring clockwise. The installation completed after you
secure the decoration ring. You need to use the proper tool to open up the side port of the U-
cable channel of the decoration ring if you want to draw out the cable from the side port of the
cable channel when you are installing the device cable. And then you can draw out the cable
from the cable channel of the pedestal. Finally you can install the decoration ring to complete
the installation. See Figure 3-3.
Figure 3-3
