IC Realtime AVR-804S User Manual Download Page 59

Page: 59 / 251

HD AVS

Standalone DVR User’s Manual

Click it again to pause current play.

In backward play mode, click

►/



to restore normal play.

│





│

In playback mode, click it to play the next or the previous section. You can

click continuously when you are watching the files from the same channel.

In normal play mode, when you pause current play, you can click



│

and

│



to begin frame by frame playback.

In frame by frame playback mode, click

►/



to restore normal playback.

►

Slow play

In playback mode, click it to realize various slow play modes such as slow

play 1, slow play 2, and etc.



Fast forward

In playback mode, click to realize various fast play modes such as fast

play 1,fast play 2 and etc.

Note: The actual play speed has relationship with the software version.

Smart search

The volume of the playback

Click the snapshot button in the full-screen mode, the system can snapshot

1 picture.

System supports custom snap picture saved path. Please connect the

peripheral device first, click snap button on the full-screen mode, you can

select or create path. Click Start button, the snapshot picture can be saved

to the specified path.

Mark button.

Please note this function is for some series product only. Please make sure

there is a mark button in the playback control pane.

You can refer to chapter 4.8.1.3 for detailed information.

Time bar



It is to display the record type and its period in current search criteria.



In 4-window playback mode, there are corresponding four time bars. In other

playback mode, there is only one time bar.



Use the mouse to click one point of the color zone in the time bar, system

begins playback.



The time bar is beginning with 0 o'clock when you are setting the configuration.

The time bar zooms in the period of the current playback time when you are playing

the file.



The green color stands for the regular record file. The red color stands for the

external alarm record file. The yellow stands for the motion detect record file.

Time bar

unit

●The option includes: 24H, 12H, 1H and 30M. The smaller the unit, the larger the
zoom rate. You can accurately set the time in the time bar to playback the record.



The time bar is beginning with 0 o'clock when you are setting the configuration.

The time bar zooms in the period of the current playback time when you are playing

the file.

Summary of Contents for AVR-804S




























































































































































































































































Search results

Summary of Contents for AVR-804S

Reviews:

Related manuals for AVR-804S

Brands by name

Popular brands

IC Realtime AVR-804S, User Manual

Search results

Summary of Contents for AVR-804S

Reviews:

Related manuals for AVR-804S

Brands by name

Popular brands