IC Realtime AVR-804S User Manual Download Page 36

Page: 36 / 251

HD AVS

Standalone DVR User’s Manual

4.2

Startup Wizard

After device successfully booted up, it goes to startup wizard.

Click Cancel/Next button, you can see system goes to login interface.

Tips

Check the box Startup button here, system goes to startup wizard again when it boots up

the next time.

Cancel the Startup button, system goes to the login interface directly when it boots up the

next time.

General Series Hybrid Series

Figure 4-1

Click Cancel button or Next Step button, system goes to login interface. See Figure 4-2.

System consists of four accounts:



Username

: admin.

Password

: admin. (administrator, local and network)



Username

: 888888.

Password

: 888888. (administrator, local only)



Username

: 666666.

Password

: 666666(Lower authority user who can only monitor,

playback, backup and etc.)



Username

: default.

Password

: default (hidden user). Hidden user

“default” is for

system interior use only and can not be deleted. When there is no login user, hidden

user

“default” automatically login. You can set some rights such as monitor for this

user so that you can view some channel view without login.

Figure 4-2

Note:

Summary of Contents for AVR-804S




























































































































































































































































Search results

Summary of Contents for AVR-804S

Reviews:

Related manuals for AVR-804S

Brands by name

Popular brands

IC Realtime AVR-804S, User Manual

Search results

Summary of Contents for AVR-804S

Reviews:

Related manuals for AVR-804S

Brands by name

Popular brands