VPC300 Quick Start Guide
Page
22
A-7
System Parameter setup
This function allows you to set some system parameters:
OpenGTS Sever IP: for setting OpenGTS Server TCP/IP information
Unique ID: It sets present device ID. User can setup device ID for this device. Do not use
the same ID on multiple devces (ID must be UNIQUE).
Connect Periodic: for showing connection time (in minutes), which is an unchangeable
value.
Connect Interval: for setting the connection interval of auto-retry (in minutes).
Event Interval: It sets the time interval to send event signal to the device (in minutes) , in
case the connection is failed.
WCDMA produce path: for showing a directory storing batch command for 3G/LTE
connection, and this directory is unchangeable.
Bluetooth MAC address: for setting Bluetooth MAC address.
UTC Location: for setting the current time zone of the device location.
Enable GTS UTC Time: for using GPS standard time and updating system time after it is
checked.
3G/LTE Dial-up Parameter Setting: for setting 3G/LTE dial-up parameters (Note: For
more information about APN parameters, please consult your local telecommunication
service provide or visit Internet at http://www.imei.info/faq-apn/ .
After completing all settings, click <Change it> to update system parameter settings.
Note: You MUST reboot your system to activate all parameters.
