manualshive.com logo in svg

IC Medical HT-200, Operating Instructions Manual

Share
Download
IC Medical HT-200 Operating Instructions Manual Download Page 44

8. Technical information

44

8.3 FCC Statements

Statement according to Part 15.105

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:

 

»

Reorient or relocate the receiving antenna.

 

»

Increase the separation between the equipment and receiver.

Summary of Contents for HT-200

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands