53
Chapter 8
– Operational
breaks
Transportation
Only authorized persons should be allowed to take the unit out of
operation to prepare for transportation.
When carrying the HD 450/HD 450 Injection, please note the following:
■ Carry the HD 450/HD 450
Injection
only in pairs of two persons.
Should these instructions be ignored, spinal injury
and bruising may result.
During transportation for e.g. a move, freight or
transport within a practice, please note the following:
■ Remove the base rack and any other inserts.
■ Remember to close the door before the unit is transported.
Should these instructions not be followed, damage to the HD 450/HD 450
Injection and malfunctions may occur.
Also note
In addition to the instructions for taking the unit out of operation, please note
the following:
Empty the unit completely and seal the outlet valve.
Seal the water supply hoses.
Remove the base rack and any inserts.
Close the
door.
Protection from frost
The HD 450/HD 450
Injection
should be operated, stored and
transported in a frost-free environment.
However, if there is any remaining fluid in the HD 450/HD 450
Injection
that has frozen, allow the unit to stand at room temperature for 2 hours
for it to thaw.
Putting the unit back into operation after a move
When putting the HD 450/HD 450
Injection
back into operation after a
move to a new location, proceed as if you were setting it up for the first
time.
