6
6.
Operation
6.1 Placing and removing the microplate
The microplate is to be placed properly, holding it from one of the sides as shown in figure 3.
Figure 3
6.2 Speed range
•
Microplate clamp: 0-1500rpm.
•
Double microplate clamp: 0-1000rpm.
7.
Maintenance and Cleaning
•
Proper maintenance can keep instruments working properly and lengthen their lifetime.
•
Do not spray cleanser onto the instrument when cleaning.
•
Unplug the power line when cleaning.
•
Only use recommended cleansers:
Dyes
Isopropyl alcohol
Construction
materials
Water containing surfactants
/ Isopropyl alcohol
Cosmetics
Water containing surfactants
/ Isopropyl alcohol
Foodstuffs
Water containing surfactants
Fuels
Water containing surfactants
Table 4
•
Before using any other cleaning or decontamination methods, verify with the manufacturer that
such method will not harm the equipment.
•
Keep the device clean and protect it from liquid splashes, which could shorten its lifetime.
•
Wear the proper protective gloves while cleaning the instrument.
Summary of Contents for MIXS-001-001
Page 28: ...www labbox com ...
