manualshive.com logo in svg

IBT Technologies NMF94RM, Technical Manual

Share
Download
IBT Technologies NMF94RM Technical Manual Download Page 21

 

 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

 
 
 

17 

3-7 Advanced Menu 

 

 

Trusted Computing 

Press [Enter] to enable or disable Security Device Support. 

Configuration 

Security Device Support 

Use  this  item  to  enable  or  disable  BIOS  support  for  security  device.  TCG  EFI 
protocol and INT1A interface will not be available.   
The optional settings: [Disabled]; [Enabled]. 

 

CPU Configuration 

Press  [Enter]  to  view  current  CPU  configuration  and  make  settings  for  the 
following sub-items: 

Hyper-Threading 

The optional settings: [Disabled]; [Enabled]. 
[

Enabled

]:  for  Windows  XP  and  Linux  (OS  optimized  for  Hyper-Threading 

Technology). 
[

Disabled

]: for other OS (OS optimized not for Hyper-Threading Technology). 

*This item might not be available depending different CPU configuration. 

Limit CPUID Maximum 

The optional settings: [Disabled]; [Enabled]. 
This item should be set as [Disabled] for Windows XP. 

Execute Disable Bit 

The optional settings: [Disabled]; [Enabled]. 

Intel Virtualization Technology 

The optional settings: [Disabled]; [Enabled]. 
When  set  as  [Enabled],  a  VMM  can  utilize  the  additional  hardware  capabilities 
provided by Vanderpool Technology. 

Hardware Prefetcher 

The optional settings are: [Disabled]; [Enabled]. 

Summary of Contents for NMF94RM































Reviews:

No comments

Brands by name

Popular brands

Load more brands