IBT Technologies ET863i, User Manual

Page: 32 / 54

BIOS SETUP
28 ET863i User’s Manual
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
No ITEM HELP
Reset Configuration Data
Disabled
Resources Controlled By
Manual
IRQ Resources
Press Enter
DMA Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
Assign IRQ for VGA
Enabled
Assign IRQ for USB
Enabled
Menu Level
Default is Disabled.
Select Enabled to reset
Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
PNP OS Installed
Enable the PNP OS Install option if it is supported by the operating system
installed. The default value is
No .
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly. This field
allows you to set whether or not MPEG ISA/VESA VGA cards can work with
PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG
ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with
an MPEG ISA/VESA card.
Assign IRQ for VGA/USB
By default, this fields are Enabled.