background image

 54

18.  What do the labels on the Digital TENS mean?

The rating plate can be found on the underside of the Digital TENS.

S/N

 

Serial number 

 

At the end of its life cycle, this product must not be disposed of in  

regular domestic waste, but must be taken to a collection site for 

recycling electrical and electronic devices (disposal of used  

appliances).

 

 

Type BF applied part 

The applied part provides protection against electric shock by  

maintaining the leakage current at a level that conforms to standards 

(Type B).  The applied part is insulated (Type F). 

 

Follow the instructions

         

 

The product meets the safety requirements of  

EU Directive 93/42/EC

innovative�business�promotion�GmbH,�Germany

Transkutane�elektrische�Nervenstimulation�/ Transcutaneous�Electrical

Nerve�Stimulation�(TENS)

elektrische�Muskelstimulation�/�Electrical�Muscle�Stimulation�(EMS)

Artikel-Nr./Article�no.:

10155

Modell/Model:

Digital TENS�WL-2205B�Combo

Batterie/Battery:

9�V�Blockbatterie�/�9V�Battery

Hersteller/Manufacturer:

S/N:

Well-Life�Healthcare�Limited, Taiwan

Summary of Contents for DIGITAL TENS





























Reviews: