page
16
Cleaning
spray the crawler, camera, sliding guides and wheel guides with water before removing them
after an inspection, never use pressurized water
seal the sliding and screw joints with the supplied protective caps immediately after the
removal and all the components dry carefully
run the camera cable through a wet cloth during winding up
clean the cable drum and control panel only with a wet cloth (water, soft cleaner)
clean the camera glass with appropriate cleaning cloths, do not use paper, you could scratch
the camera's front glass
Warranty conditions
It is forbidden to open component´s cover without approval from the manufacturer. A failure to
comply with this regulation invalidates the warranty claims.
The warranty period starts with the date of delivery.
Defects caused by inadequate usage, maintenance, common wear or inevitable accidents (lightning,
fire, frost) are exempt from the guarantee.
The warranty does not cover quickly worn-out components such as the front glass, shaft sealing
rings, light bulbs, cables, etc. or damages that have no negative effect on usability of the equipment.
If you wish to claim a warranty, contact IBOS a.s. Company, our business representatives or the
nearest customer service with submission of the original invoice.
Limitation of warranty
The guarantee that we assume under the mentioned conditions is limited to repair, replacement or a
refund.
IBOS a.s. assumes no responsibility for consequential damages that may arise in connection with
selling or operating the product. This applies for consequential damages that can be classified as
business losses such as a loss of profit, standing time, damaged reputation or damages caused to
other instruments or property.
IBOS a.s.
Hlinska 694/2b
370 01 Ceske Budejovice
Czech republic
tel: +420 387 310 227 e-mail: