CamBoss
9 / 19
camera seals and increases its wear. The pressure over 1 bar is already critical
and sealing of the device can be compromised.
Caution!
The operator of the plant is responsible for the proper disposal of the waste!
11. Controlling the system
All necessary controls are located on the control unit panel. There are two joysticks controlling
the movements of the trolleys and camera. Two potentiometers controlling the illumination
intensity for the camera head and pantograph. When the control unit is switched on, the
connected components are loaded – winch, trolley, camera head, etc. If the control unit does
not load any active connected equipment, the display shows the axial camera connection.
Recording of video
Accessory operation
Joystick for
controlling the
camera
Joystick for trolley
operation
Pantograph up / down
Open main menu /
return to previous menu
Open submenu /
selection confirmation
Resetting the meter
counter
Automatic CCW/CW detection of
piping connection
Sensor on / off toggle
Menu operation -
increase/decrease the
value
Camera alternation
switching - front / rear
Laser on / off toggle
Set the camera to zero
position