IBO IVR-10 User Manual Download Page 19

KONSERWACJA / PRZECHOWYWANIE

18

Instructions for Maintenance

- Maintenance may only be carried out by an authorized electrician.
- Maintenance work does not have to be identical for the same device and the extent to which maintenance is decided by the 
   operator
- Good ventilation is required in summer. At the same time, the device should not be exposed to direct rays
   sunny or rainy. In winter, store in a warm place, away from flammable substances.
- Cut off the power supply if the device is not working for a long time

Storage & Safekeeping

Stick to the following guidelines for short / long shelf life
- Store in a dry, dust-free, well-ventilated place at the required temperature
- If you store for more than a year before restarting the work, disconnect the powered pump and carry out a charging test
    to activate the capacitor
- Tests, tests for puncture insulation resistance are not allowed, they shorten the life of the device.
- All work after opening the controller should be carried out no earlier than 15 minutes after disconnecting it from the power supply

Disposing of the device

 

The used product is subject to the obligation to dispose of as waste only in the selective collection of waste organized by the Network
Municipal Electric and Electronic Waste Collection Points. The consumer has the right to return used equipment online
distributor of electrical equipment, at least free of charge and directly, provided the returned device is of the correct type and full
same function as the newly purchased device.

DECLARATION OF CONFORMITY

1. Inverter - IVR-10 pump controller
2. PHU Dambat, Gawartowa Wola 38, 05-085 KAMPINOS, POLAND, e-mail: [email protected]
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Pump controller described in point 1.
5. On the basis of the Act of 30 August 2002 on the compliance system (Journal of Laws of 2004 No. 204 
    item 2087) We declare with full responsibility that submersible pumps to which this
    the declaration relates, they are made in accordance with the following Directives and contained 
    therei references to harmonized standards:

   LVD Directive No. 2014/35 / EU
   Applied standards: EN 60335-1: 2012 + AC: 2014, EN 60335-2-41: 2003 + A1: 2004 + A2: 2010
   EMC Directive No. 2014/30 / EU
   Standards used: EN 55014-1: 2006 + A1 

 2009 + A2: 2011, EN 61000-3-2: 2014

Adam Jastrz

ębski

23.

10

.201

9

Summary of Contents for IVR-10





















Reviews: